58 thoughts on “How to Setup a NetGear Router via RouterLogin.net

  1. I cannot get my laptop to connect to the wireless router. I have my printer and smart phones connected but not the laptop. This site you sent me to does not help at all. I really could use a live person to talk to or an interact chat!!!!!!!!!!!!!

    Reply
  2. My netgear router has stopped sending out the wireless signal. Only the computer connected to the router can connect to the internet???

    Are there procedures to test the router?

    Reply
    1. Hello Mr. Lg. Here is the connection part.

      Router 1 (supplied by ISP) – Internet Main Cable to Router 1 Internet Line Port. Take a LAN cable and connect it to LAN1 of Router 1.

      Router 2 (Your Router) – Other end of the LAN1 of Router 1 connect it to Internet Line Port of Router 2. Take another LAN Cable and connect it to LAN1 of Router 2. Other end of the LAN1 of router 2 connect it to PC LAN port.

      Done!! Thanks!

      Reply
      1. I have connected my laptop as you described in your reply to Lg, but I still can not connect to the internet, it say’s I have Ethernet connection, but I can not launch a web browser.

        Reply
      2. Hi, I need help on this step, I am trying to follow the instructions here on how to use the NetGear N750 wifi router with my Verizon Fios connection.

        I can’t even get step 1 of the NetGear set up to work. Trying to now follow the steps above, I can’t figure out this step,
        -Take another LAN Cable and connect it to LAN1 of Router 2. Other end of the LAN1 of router 2 connect it to PC LAN port.

        can you please assist?

        Reply
  3. Hello, when I try to connect to routerlogin.net, routerlogin.com or either ip address, It will not accept “admin” and “password” from me. It will close out the box but then it will prompt me to enter a username and password again. Can you help me?

    Reply
  4. I have the netgear n300 model no. wnr2000, on the front of my router i have 5 triangles, the top one is a power- green, the bottom one (( . )) is also green, the middle light is orange, there are 2 towards the bottom that are not lit up at all, I can connect my desktop computer and my dishnetwork televisions to the internet, but no other devices, I have tried going to routerlogin.com, routerlogin.net, 192.168.1.1 and 192.168.0.1 it will will open anything on these pages, what else can i do?

    Reply
  5. Hello ,
    I have recently installed a new modem on our computer and now our netgear router is not working properly . Could you help me get it working right again?
    Thanks

    Reply
  6. Everything worked as well but when I log in to this webpage there is no wireless setings only basic settings . Is there an other way a I can configure it? It is the Netgear RP614 router

    Reply
    1. Hello,
      We thing you are accessing the router remotely. You need to enable remote administration by connecting router through ethernet cable to get all available options on wireless devices.

      Reply
  7. I just bought a new netgear x4. The book says I can setup the router via wifi. However I do not see the genie screen, and the router has power and it’s yellow cable is plugged into the cable modem. HELP!

    Reply
  8. I’m trying to set up a Sony Bravia smart tv with xfinity. the instructions for the tv says i need to use a router. I have a netgear router. i keep getting an error message that says my router might have the wrong PPoE setting.
    any thoughts on this?

    Reply
  9. Hi,
    Ive had some trouble with my nether router, every time i use the web addresses all that happens is it says safari can’t open the page Please help

    Reply
  10. Installation has been impossible. Finally figured out what the security key was that it wanted. Router login genie appeared, but it didn’t ask for username and password. It just said I wasn’t connected to the internet. When I click on my available connections box, my router is listed, and it is green, and says it is connected, but when I try to open anything it says I am not connected to the internet. What am I doing wrong???

    Reply
  11. I have N300 Wireless router WN2000v4. It works fine with desk top computer
    but Ipad and apple 6S+ iphone do not seem to be working. Please help.

    thanks in anticipation

    Neelam

    Reply
  12. The router on my NetGear is not sending a wifi signal although the signal light is on. I believe I net to reset it. However, the NetGear software won’t open on my laptop. It starts to and then I get the message “A problem cause the program to stop working correctly. Windows will close the program and notify you if a solution is available.” I uninstalled and then reinstalled but I’m still getting the same message.

    Reply
  13. I am having problems with the IP provided router not working in all of house do I set upthe Netgear 300 router in the same room or can it be done on a smart tv? In the other end of the house?Thx KC

    Reply
  14. My Adition has free wireless internet. But I can’t get a very good signal inside my home. So I borrowed a router hoping the signal would get better inside my home but have no idea how to hook it up and get connected to the net. Could some one give me a little insight or help?

    Reply
  15. in my netgear router even if i connect the lan cable to the coloured port the internet symbol in the router i.e./ the globe symbol in the router is not lighting up. What should i do

    Reply
  16. I haven’t been able to connect to my wifi netgear router for the last two days. My phone shows it is saved and will try to connect then fail..this is not even a year old

    Reply
  17. I have a linksys EA4500. The security mode choices do not match those in your video.
    My choices are:
    – None
    – WEP
    – WPA2 Personal
    – WPA2 Enterprise
    – WPA2/WPA Mixed Personal
    – WPA2/WPA Mixed Enterprise

    Please advise.
    Thanks, Jim

    Reply
  18. I have a netgear N300 router and it is between the modem from Hughes net and the computer which the hughes tech recommended to have our phone to work. But still no phone service at all. It is a vonage hookup to the internet We need our service as we are both seniors w/medical problems. Thank you

    Reply
  19. i brought N300 Wireless ADSL2+ Modem Router DGN2200v4 but i am not able to set up the router as the sites routerlogin.net are not working. i also tried 192.168.1.1 and 192.168.0.1 are also not woro how to get clientking. but when i am typing my router ip address it is asking for client id and password. so hw to get client_id and password. please do help me out. could me provide me netgear customer email id or toll free number

    Reply
  20. We just had our router repaired and they said we need to reconfigure it. How do I do that? It’s showing up as a connection but won’t let me browse

    Reply
  21. I bought new nighthawk router…… Got it wifi connected to my main computer but can’t get my mobile devices to be accepted??? I have iPhones and iPads. What to do??

    Reply
  22. I have my wifi router reciving internet from a wired modem and every day i have to reset the router and its really annoying is there something i havent set up or a setting that i missed because im really getting tired of having to turn off my router and turn it back on

    Reply
  23. I was able to to get comnected to the netgear wifi, but if i try to go to Google it wont open the page, it says my internet isnt connected. But my modem shows that the internet is working and is properly fine.

    Reply

Post Comment